home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Mag HDD Backup
/
Amiga Mag HDD Backup.zip
/
Amiga Mag HDD Backup
/
Alexander.img.bin
/
Alexander.img
/
portable
/
Virus Fighters
/
Disinfectant 3.3.sea
/
Disinfectant.rsrc
/
STR#_209.txt
< prev
next >
Wrap
Text File
|
1993-11-04
|
7KB
|
261 lines
on the phone.
of files which you suspect may be infected. Please do not try to call him
Please mail him a detailed report and, if it is at all possible, include copies
Disinfectant for assistance. His addresses are at the end of this manual.
have a new virus, then you should feel free to contact the author of
If you have followed all of this advice and if you still think that you may
user group and ask for help.
gurus within the department for help. Go to a meeting of your local Mac
you work for a corporation with a computer department, ask the local
faculty member, ask for assistance at your campus computing center. If
friend or local expert. If you are a university student, staff member, or
If your problems continue, try to obtain the assistance of a knowledgeable
several files.
modification date. Look for consistent patterns of change which affect
you may see a legitimate increase in size and/or change in the last
a virus. Also, some applications modify themselves, and in these cases
modification date of your System file; this is normal and does not indicate
however, be concerned about changes in size or changes in the last
that there may indeed be a virus spreading on your system. Do not,
last modification dates are consistently changing, this is one indication
command. If your applications are consistently growing in size, or if their
application file sizes and last modification dates with the FinderΓÇÖs Get Info
a new virus, there are a few additional things you can try. Monitor
If all else fails and you still suspect that your system may be infected by
Option, and Shift keys while opening the Control Panel desk accessory.
To reset the parameter RAM under System 6, hold down the Command,
release the keys at this point.
zapped, you will hear a beep, and the system will restart again. You can
Option, P, and R keys while restarting your Mac. When the RAM has been
To reset the parameter RAM under System 7, hold down the Command,
Some problems can be cured by resetting the parameter RAM.
consult note number 134, ΓÇ£Hard Disk Medic & Booting Camp.ΓÇ¥
Mac sold. If you have access to AppleΓÇÖs Macintosh Technical Notes,
available, including AppleΓÇÖs Disk First Aid, which is included with every
floppies or tapes. There are several good disk recovery utilities
reinitialize and reformat the disk and reload your files from backup
you may attempt to use a disk recovery utility, or you may be forced to
the disk at all, or the system may simply behave strangely. In this case,
disk become inaccessible, or the system may not even be able to mount
sometimes be so serious that all or some of the files and folders on the
contain file directories and other important system information. This can
In some cases, software errors can damage the areas on your disk which
the old System folder.
version. If the problem persists, delete the problem file. Finally, remove
which is causing the problem. Replace the problem file by a known good
last few files from your new System folder one at a time to locate the file
problem to the last few files which you copied. You can now remove these
problem reappears, you will have narrowed down the cause of the
not come back, copy a few more files over and repeat the process. If the
use it for a while to see if the problem has come back. If the problem has
new System folder. Restart your Mac after each copying operation and
Next, copy files, a few at a time, from your old System folder into your
file.
fonts and desk accessories from your old System file to your new System
System file. Under System 6, use the Font/DA Mover to copy all of your
of your old fonts and sounds from your old System file to your new
Under System 7, open both your old and your new System files. Drag all
that the cause of the problem was something in your old System folder.
from this hard drive. If your problem disappears, then you have verified
disks to install a completely new System folder on the hard drive. Restart
drive System folder ΓÇ£Old System Folder.ΓÇ¥ Then use your Apple installer
file outside of the System folder on your hard drive. Rename your hard
scratch. Restart your Macintosh from a startup floppy. Drag the Finder
The best way to cure this problem is to rebuild your System folder from
Another common problem is damaged system files in the System folder.
locked original master floppy.
behaving unusually, try replacing it with a known good copy from your
Another common problem is damaged applications. If an application begins
when the alert appears.
keys while inserting the floppy into a floppy drive. Click on the OK button
To rebuild the desktop on a floppy disk, hold down the Command and Option
button when the alert appears.
appear asking if you really want to rebuild the desktop. Click on the OK
Option keys held down throughout the startup process. An alert will
System 6 or System 7, restart your Macintosh, keeping the Command and
that you want to start up using Finder instead of MultiFinder. For either
use the ΓÇ£Set StartupΓÇ¥ command in the FinderΓÇÖs Special menu to specify
To rebuild the desktop on a hard drive, if you are using System 6, first
desktop.
your icons are not being displayed properly, you should rebuild the
few icons. This problem is almost always due to a damaged ΓÇ£desktop.ΓÇ¥ If
virus, save for the Scores virus which does change the appearance of a
display of icons in Finder windows. This symptom is almost never due to a
One very common symptom on the Macintosh is problems with the proper
and see if the problem disappears.
software lately?ΓÇ¥ If the answer is ΓÇ£Yes,ΓÇ¥ try removing the software
Thus, the first question you should ask is, ΓÇ£Have I installed any new
or any other kind of problem imaginable.
piece of software can cause crashes, hangs, damaged files, trashed disks,
error in an application, extension (INIT), control panel (cdev), or other
The most common cause of problems is simple errors in software. An
virus. There are several things you can do to try to isolate the problem.
yield to the temptation to immediately blame the malfunction on a new
If your Macintosh begins to malfunction or behave unusually, please do not
were actually new viruses.
experts but, after careful investigation, only a handful of these cases
people have reported strange behavior on their Macintoshes to anti-virus
all of them have absolutely nothing to do with viruses. Thousands of
There are many, many things which can go wrong on a Macintosh. Almost
locate any known viruses.
may be infected by a new virus, but Disinfectant reports that it cannot
This section discusses what you should do if you think that your system
åProblem Clinic
-
-